Emergency lighting and power equipment model r-1 manual

completely self-contained, fully automatic standby power source for operation on lighting loads. The batteries are sized and tested per UL and Life Safety Code ANSI / NFPA , providing emergency power for a minimum of 90 minutes. If the duration of a power failure is greater than the batteries storage capability, the inverter will. Brand: Bow Lighting. This product is a variation of the base model: R-1 Emergency Light. The EE / EG has either been discontinued or may no longer be available. When you order the EE / EG, we may substitute with equivalent or better product. Scroll down to view substitute product (s) below.5/5(1). Instructions for LED Emergency Lighting Fixture IMPORTANT: Let the battery charge up for at least 24 hours. Then normal operation of this unit should take effect. To check, press the “TEST” button. The LED lamps on the unit should turn ON. During an electrical power failure, the LED lamps will automatically come on for a minimum of 90 minutes.

5. Do not use this equipment for other than its intended use. 6. Servicing of this equipment should be performed by qualified personnel. 7. Disconnect AC power before servicing. SAVE THESE INSTRUCTIONS! INSTALLATION (J-BOX MOUNTING): 1. Feed fixture leads through back plate and connect AC power supply (Fig A). 2. Connect wires through J-Box. Bow Lighting - r-1 - 6 volt emergency light w/ thermoplastic housing w/ battery backup / voltage input. Here is a list of the product variation: R-1B, RSDT Emergency Light, RSDT, R-1B Emergency Light, R1NC or R-1NC, R-1NC-6C3P Emergency Light, RAIA, R-1B-AIA. ELSC offers a wide variety of emergency lighting, exit signs, backup batteries, lamps, and inverters. Check out our selection of Assembled in America emergency lights, and Assembled in America exit signs. We also build custom battery packs for your power needs. Offering internet sales since We ship many emergency lights and exit signs the.

The remote heads would then operate on the same emergency mode as the standard units (see Emergency Operation Section). Electrical Components. Dual voltage. When using electrical equipment, basic safety precautions should always be followed COMBINATION EMERGENCY EXIT LIGHT. INSTALLATION: Back Mounting –. 1. the delivery and installation of Eaton emergency lighting systems and lights by virtue of system, first examine whether the electrical equipment in.